Service hotline
：
+86 523-84385453
4. 2
、
V/F diagram
4. 3
、
Installations
⑴、Before unpacking the spindle, please check if the package is intact
without moisture.
⑵ 、
Please check if the specifications of the motor accord with the
application requirement.
⑶、Carefully check if there is any damage or transformation during the
transportation, and if the fastener loosens or drops.
⑷、It’s permitted to install the motor spindle vertically or horizontally.
For self-cooling spindle, think about the heat dissipation during the
installation and use a radiator if necessary.
⑸、
For water cool motor spindle, make sure the tubing joint is tight and
strong enough to avoid water leaking.
⑹、Generally, the spindle is fixed on its housing. Please manufacture
the holder according to the following image.。
⑺ 、Before starting the spindle, manually feel if the spindle can rotate
smoothly without any blocking.。
⑻、
For the spindle with power plug, its connection is like that: Below
To Next Page
Loading...
Need help?
General
