EasyManua.ls Logo

Jimi JM01 - 6.7 Corners Upload Control; 6.8 Arm Time Interval Setting; 6.9 Reboot Terminal

Jimi JM01
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.7 Corners upload (ON as default)
The terminal will upload GPS data to the platform when the vehicle is turning (the
turning angle reaches the pre-set value).
NOTE: if the speed is too low during turning, the GPS data will be not able to
upload to the platform.
Send SMS command: ANGLEREP,OFF# to turn it off.
6.8 Arm time interval
When the vehicle is turned off (ACC low) and stays off in 3 minutes(pre-set), the
terminal will enter arm status. During this status, if the terminal detects 6 vibrations
(default) and the vehicle still stays off (ACC off) in 30 seconds, it will activate
vibration alarm.
Send SMS command: DEFENSE,T# (1≤T60 minutes)
e.g. DEFENSE,15#
It means after 15 minutes the vehicle is turned off, the terminal will enter defense mode.
6.9 Reboot the terminal
Send SMS command: RESET#
When the terminal receives the command, it will reboot in 20 seconds.

Related product manuals