Jimi JM01 User Manual

The platform website: www.jimishare.com
Please contact your supplier for the login methods and operations.
7.2 Vibration Alarm (ON as default)
When the vehicle is turned off (ACC low) and stays off for 3 minutes (pre-set),
the terminal will enter arm status. During this time, if the terminal detects 6 times
vibrations (default) and the vehicle still stays off (ACC off) in 30 seconds, it will
activate vibration alarm. The terminal will upload longitude and latitude data to the
platform. Then the platform will send the google link to SOS number.
e.g. GPS information link:
“vibration alarm: <DateTime:10-11-23 23:42:51> http://maps. google.com/
maps?q=N22.571490,E113.877103”
If you do not want to receive vibration alarm messages, send SMS command:
SENALM,OFF# to turn it off.
7.3 Cable cut-off Alarm (ON as default)
When the terminal cable is cut off, the cable cut-off alarm will be activated. The
terminal will send the alarm to the platform and upload longitude and latitude data.
And the platform will send google link to SOS number.
e.g. GPS information link:

Jimi JM01 Specifications

General

Brand	Jimi
Model	JM01
Category	GPS
Language	English