JIYI Robotics CO. Ltd
Attentions
1. The premise of automatic return-to-home is that the aircraft return-to-home
waypoint has been recorded. If you need to use automatic return-to-home, please arm
it after searching satellite . You can refer to the appendix about LED tricolored light
indication and meaning.
2. When the aircraft is near people, we suggestted not to switch into the automatic
return-to-home mode in case of accident.
5.2 Advanced functions
5.2.1Cut-out and continue spraying
If you interrupt AB operation and change battery, it will continue to execute the
latest AB operation after switching the control stick to AB mode.
Please read the ASSISTANT2 description before use this functions.
5.2.2One-key sidesway
1 Parameters setting
Supporting the configurations of the banner in sidesway by both Assistant2
Software and APP.
Assistant Software setting:connect to Assistant2 Software and enter the path of
“Adv”—“Plant”. Read AB operation process.
APP setting: use data-link to connect the FCU. Please refer to the port definitions
table.
To Next Page
Loading...
