JIYI K3-A - User Manual

JIYI Robotics CO. Ltd
1
K3-A
USER MANUAL
Ver.1.0.6
Last updated:2017/07/24
Thank you for choosing K3-A flight controller. Hope you will have a good
flight with K3-A. We strongly recommend you to read this manual
carefully before you install K3-A flight controller. The following
instructions will help you to make your K3-A flight controller work
perfectly.
Note: This manual shall be used together with the K3-A assistant
software. If you find differences between this manual and the assistant
software, please follow the assistant software.
If you have any difficulty during the usage, please contact with JIYI
Robotic Co., Ltd. at support@jiyiuav.com

Summary

Setup Wizard

Wiring Diagram

Illustrates connection ports for FCU and peripherals, and provides port definitions.

FCU Setup

Explains FCU orientation and installation position for optimal performance.

GPS Setup

Covers GPS module installation direction and optimal placement.

Configuring by Assistant Software

Software Installation

Steps to download and install the necessary driver and assistant software.

FCU Connection

Describes how to connect the FCU using the assistant software interface.

FCU Configuration

Details FCU configuration settings within the Assistant2 software.

Flight Operations

ATT-STA Mode

ATT-ALT Mode

GPS-ANGLE Mode

GPS-SPEED Mode

AB-MODE Operation

Auto-Return-to-Home

Explains the auto-return-to-home mode, its triggers, and operational procedures.

Arm and Disarm

Fail-safe Protection

JIYI K3-A Specifications

General

Brand	JIYI
Model	K3-A
Category	Controller
Language	English