To Next PageTo Next Page
Need help?Do you have a question about the JLab GO AIR SPORT and is the answer not in the manual?
General| Foldable | No |
|---|---|
| Headset type | Binaural |
| Product type | Headphones |
| Product color | Teal |
| Wearing style | In-ear |
| Music playback | Yes |
| Operating keys | Answer/end call, Bluetooth pairing, Multi-key, Mute, Play/pause, Reject call, Track \u003C, Track >, Volume +, Volume - |
| Volume control | Touch |
| Control unit type | On-ear control unit |
| Recommended usage | Sports |
| Protection features | Dust resistant, Sweat resistant, Water resistant |
| International Protection (IP) code | IP55 |
| Standby time | 60 h |
| Charging source | USB |
| Battery capacity | 350 mAh |
| Talk time (ANC off) | 32 h |
| Battery recharge time | 2 h |
| Number of batteries supported | 3 |
| Continuous audio playback time | 8, 32 h |
| Right earpiece battery capacity | 43 mAh |
| USB connector | - |
| Wireless range | 10 m |
| Bluetooth version | 5.1 |
| Bluetooth profiles | A2DP, AVRCP, HFP, HSP |
| Connectivity technology | True Wireless Stereo (TWS) |
| Frequency response (music mode) | 20 - 20000 Hz |
| Microphone type | Built-in |
| Quantity | 1 |
| Charging case type | Wired |
| Accessories included in set | 3 sizes gel eartips |
| Charging case connector type | USB Type-A |
Weight and Dimensions| Depth | 30 mm |
|---|---|
| Width | 60 mm |
| Height | 82 mm |
| Weight | 58.3 g |
| Charging case weight | 46 g |
| Left earpiece weight | 6 g |
| Charging case dimensions (W x D x H) | 80 x 60 x 29 mm |
Take earbuds out of case, remove stickers, and place back in case with door closed.
Red light on case indicates charging. Remove earbuds from case to begin pairing.
One earbud will blink blue/white, indicating it is ready to pair with your device.
Select "JLab GO Air Sport" in device's Bluetooth settings. Voice prompt confirms connection.
Turn off Bluetooth on previous device, turn on for new device to pair automatically.
Claims subject to JLab authorization and sole discretion. Retain proof of purchase.
Reach out via support@jlab.com or jlab.com/contact for assistance.
Register at jlab.com/register for product updates, how-to tips, and FAQs.
Controls volume down, Siri/OK Google activation, and track backward.
Controls volume up, play/pause, track forward, answer/hang up calls.
Lists voice prompts for power, pairing status, connection, and battery levels.
Signature sound with amplified bass and vocals.
Provides an even sound profile without additional enhancements.
Delivers amplified bass and sub-bass frequencies for a powerful sound.
Earbuds power off and begin charging automatically when placed in the case.
Case shows solid red for 100-25% charge, blinks red when below 25%.
Earbuds automatically power on and connect to the device upon removal from the case.
Case blinks blue while charging and shows solid blue when fully charged.
Try ear tips for best fit and proper seal, place hook behind ear for secure placement.
Earbuds can be used independently; connect only one Bluetooth device at a time.
Dry earbuds fully before placing in case; earbuds are water-resistant, but the case is not.
Manual reset procedure for connection failure or earbuds disconnection.
Avoid extreme temperatures, dropping, crushing, and ear wax buildup.
Lower volume or discontinue use if discomfort occurs; consult a physician for persistent issues.
