JLab JBuds Frames User Manual

L
R
JBUDS FRAMES
Locate the L & R on the back. If needed, add the
Rubber Sleeves on hooks for narrow stem glasses.
ASSEMBLY
1
Press and hold BOTH buttons 5+ seconds. One side
will start blinking blue/white indicating ready to connect.
CONNECTING BLUETOOTH
1
Slide the JBuds Frames on corresponding
left and right stems of glasses.
2
Enter your device settings and connect to
“JLab JBuds Frames”. Solid white lights will
indicate you are connected.
2
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlab.com
or visit jlab.com/contact
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
REGISTER TODAY
jlab.com/register
Product updates | How-to tips
FAQs & more
The JBuds Frames should be positioned
closest to the ear for best performance.
L
R
Thin Frames:
ICON facing out
Very Thin Frames:
LOGO facing out
Rubber
Sleeves
Bluetooth
Settings
JLab JBuds Frames
ADDING NEW/ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device. Power ON the JBuds Frames and they will
enter Bluetooth pairing after 10 seconds. Select “JLab JBuds Frames” in new device settings to connect.

JLab JBuds Frames Specifications

General

Type	Open-ear
Battery Life	8 hours
Charging Time	2 hours
Water Resistance	IPX4
Driver	16mm
Frequency Response	20Hz - 20kHz
Microphone	Yes
Wireless Range	10 meters

Summary

Assembly

Attaching Rubber Sleeves

Add rubber sleeves to hooks for narrow stem glasses if needed.

Positioning on Glasses

Slide frames onto left and right stems for optimal performance.

Connecting Bluetooth

Initiating Pairing Mode

Press and hold both buttons for 5+ seconds until one side blinks blue/white.

Device Connection

Connect to "JLab JBuds Frames" in device settings; solid white lights indicate connection.

Button Functions and Voice Prompts

Left and Right Button Operations

Details volume, track control, voice assistant, call handling, and media playback.

Voice Prompt Indicators

Explains spoken alerts for power, pairing, connection, and battery status.

EQ Settings

Customizing Sound Profiles

Triple press an earbud to cycle between JLab Signature and Bass Boost EQ settings.

Charging

Charging Procedure

Connect JBuds Frames to a USB power source (5V 1A or less) for charging.

Quick Tips

Optimal Fit and Usage

Position frames close to ears for better audio; use left/right independently or together.

Troubleshooting

Manual Reset Procedure

Forget device, power off frames, reset for 15s, power on, and reconnect.

Cautions and Care

Product Care and Safety

Avoid extreme conditions, dropping, and wax buildup. Seek medical advice for discomfort.