JLG 41AM User Manual

Operation and Safety Manual
ANSI
®
Original Instructions - Keep this manual with the machine at all times.
Model(s)
AM Series
20AM
25AM
30AM
36AM
41AM
P/N - 3121211
November 12, 2014

JLG 41AM Specifications

General

Platform Height	41 ft
Platform Capacity	750 lb
Weight	6, 490 lb
Drive Speed	2.5 mph
Gradeability	25 %

Summary

Section 1: Safety Precautions

1.2 Transporting Safety

Safety guidelines for moving the machine, including platform status and personnel.

1.3 Pre-Operation Safety

1.4 Operation Safety

Guidelines for safe machine operation, including load limits and environmental conditions.

1.5 Maintenance Safety Precautions

Section 2: User Responsibilities, Machine Preparation, and Inspection

2.1 Personnel Training Requirements

Emphasizes the need for trained personnel and outlines essential training content.

2.2 Preparation, Inspection, and Maintenance

2.3 Pre-Start Inspection Procedures

Details the required checks before starting operation, including cleanliness and decals.

2.4 Function Check

2.5 Daily Walk-Around Inspection

General inspection checklist for daily walk-around, focusing on key components.

Section 3: Machine Controls and Indicators

3.2 Controls and Indicators Overview

Detailed explanation of controls and indicators on the ground and platform stations.

Section 4: Machine Operation

4.2 Operating Characteristics and Limitations

4.3 Battery Charging & Maintenance (DC Models)

Instructions for charging and maintaining DC model batteries, including safety precautions.

4.4 Machine Set-Up and Operation

Steps for setting up the machine for operation, including brakes and outriggers.

4.6 Machine Shut Down and Park

4.7 Transport, Lifting, and Tie Down

Guidelines for transporting, lifting, and securing the machine for transit.

Section 6: Emergency Procedures

6.2 Emergency Operation Procedures

Section 7: General Specifications and Operator Maintenance

7.2 General Specifications

7.3 Operator Maintenance