Easy Stitch - 11
The power supply for the adaptor has DC rated output of 6V (rated current of
800MA shown in its voltage matches the AC voltage). Plug the adaptor into
the adaptor’s socket and the power will be connected. Please Note: Before
plugging in, make sure to set the switch in the OFF position.
Possible causes
Batteries are incorrectly aligned
Batteries have run out
Old and new batteries mixed
Mains lead is loose
Mains lead is damaged
Machine is faulty
Machine has not been threaded
properly
Needle does not reach the bottom
of the foot plate
Fabric is too thick
Top or bottom thread has
got tangled
Trouble shooting
Align the batteries
Replace the batteries
Use similar life batteries
Check mains lead plugged in
correctly
Contact Customer Service
Contact Customer Service
Redo the top and bottom threading
(see instructions)
Make sure needle is fitted
correctly (see instructions)
Material unsuitable for machine
Re-thread the top or bottom
thread (see instructions)
Trouble
The machine doesn’t work when
the power is ON
Sewing cannot be done when the
machine is running
The machine comes to a sudden
stop when sewing is going on
What size is the needle?
Size 90/14 already fitted,
there is also a spare
This is suitable for medium
weight fabrics
Can I use other sizes?
Yes
9/70
11/80
16/100
Fine Fabrics
Lightweight Fabrics
Heavyweight Fabrics
ES_Inst.indd 11
14/11/07 09:12:12
To Next Page
Loading...
Need help?
General