Easy Stitch - 7
1. Rotate the hand wheel in the direction
shown by the arrow to raise the
needle to the highest position.
2. Lift up the foot lever (14) to raise
the feeder foot and put in the fabric.
3. Lower down the foot lever.
4. Rotate the hand wheel two or three
times to check the fabric movement
and stitching.
5. Turn the switch on and start
sewing.
6. High or low speed can be selected
by using the speed switch.
7. When sewing is finished, turn the
power switches off, rotate the hand
wheel and lift the needle. Raise the
foot lever to remove the fabric and
cut the thread.
Please Note: If the fabric is difficult to remove, rotate the hand
wheel back and forth and the fabric should then come out
easily.
1
2
3
4
5
6
7
ES_Inst.indd 7
14/11/07 09:12:11
To Next Page
Loading...