11
Using your iWalk™ The Family Treadmill
After Use
Storing and folding your iWalk away safely:
1. Remove the Vertical beams locking bolt
by turning anti-clockwise (see figure 1).
2. Lift the running belt to an upright position
(see figure 2).
Fig. 1.
Fig. 3.
Fig. 2.
3. Pull out the folding pin and place it
into the hole, securing the running belt
upright to the Vertical beams
(see figure 3).
4. Now you can move your iWalk. Hold the
handlebars with both hands and lean the
iWalk until the wheels touch the ground
so you can move the iWalk.
To Next Page
Loading...