14
Technical Information
Technical Specifications
Running area (WxL) 33.5cm x 101cm
iWalk net weight 22kg
Maximum user weight 110kg
Maximum speed 10km/h
Power consumption 500W
Power supply 220-240V~50Hz AC
Disposal and the environment
This product is covered by the waste electrical and electronic equipment
(WEEE) regulations. It should not be discarded with normal household waste,
but taken to your local collection centre for recycling. For further information,
please contact your local authority or approved disposal agency.
Fuse & mains plug replacement
(UK & Ireland only)
This appliance is fitted with a BS 1363 13-amp
plug. If you have to replace the fuse, only use
those that are ASTA or BSI approved to BS
1362 and have a rated current of 13 amps.
To change the fuse
1. Use a flat-head screwdriver to prise the
cover off the fuse compartment.
2. Carefully remove the existing fuse.
3. Clip the new 13 amp fuse into place.
4. Clip the cover back firmly into place.
If the power cord is damaged in any way
please contact JML Customer Services.
How often the running belt needs to be lubricated depends
on how often the iWalk is used per week
<3 hours per week Every 6 months
3-6 hours per week Every 3 months
>6 hours per week Every month
To Next Page
Loading...
General