1540 Four-Reel Film Tank
Comes complete with one #1501 reel (is actually a #1510 and
#1530 combined.
1526 Combo Drum Designed to process one 8x10" print or five rolls of film.
1501
Adjustable Film Reel
(35mm/120/220)
The #1501 reel has a clip that separates two 120 films from
each other.
1500 System - Film Quantity and Chemical Volumes
Reel # 1502 1501 Chemical Volume
Tank / Film 110 35mm 120 220 Rotary Inversion
1510 4 1 n/a n/a 140ml 250ml
1520 8 2 2 1 240ml 485ml
1530 (module) 12 3 4 2 330ml 725ml
1540 (1510 & 1530) 16 4 4 2 470ml 975ml
1520 & 1530 20 5 6 3 570ml 1210ml
1510 & 1530 & 1530 26 7 8 4 800ml 1700ml
1520 & 1530 & 1530 32 8 10 5 900ml 1935ml
Acessoires and spareparts
Magnet
Item No. 1504
Allows use of all tanks and drums on processors without a Jobo
Lift (magnet drive). The magnet upgrades all inversion tanks to
rotary tanks. All tanks and drums (except the 3000 system and
Expert) have holding pins on the bottom to which the magnet is
at-tached.
CogLid
Item No. 1503
With a separate 1503 cog lid, you can keep the original inversion
lid that came with your tank instead of converting it with a 1505
cog. This allows you to use your tank for inversion with the
original lid or as a rotary tank with the 1503 cog lid. Fits all 1500
series tanks.
Cog
Item No. 1505
For upgrading tanks and drums for operation with the JOBO Lift.
The cog is pushed into the original lid of the tank/drum and can
be used on all processors equipped with a JOBO Lift (except ATL
To Next Page
Loading...
Need help?
General
