1500 Tank System
Product Summary:
The motto of the 1500 series line of tanks is "price them so hobbyists can afford them, but make them
provide lab-quality processing". (In case you're wondering, it wasn't easy.) 1500 series tanks are used
for inversion (hand) processing and rotary processing on anything from a small CPE-2 Plus
processor, all the way up to a full-blown ATL-2500.
Key Features
Crack resistant
They're made of flexible plastic -- it makes them crack resistant (we can't say crack "proof" because if you
threw one against the wall hard enough on a cold Winter morning it might crack).
You CAN take it with you
Many, many people have come to appreciate the modularity of JOBO tanks and drums. Unlike other
manufacturers, if you want to add more developing capacity, you have to buy a whole new tank (the most
expensive part). With JOBO tanks, if you have a two-roll tank #1520 and you want to increase the capacity all
you need to buy is an extension module #1530.
Also, if you ever want to move up to a rotary processor like the CPE-2 Plus, you'll be able to use the same
tanks you used for hand processing.
Save money!
You save money in three ways: The 1500 series tanks use very little chemicals to process film, the 1500
series allow you to process two rolls 120 film per reel (not loaded back-to-back), and the third way you save
money is if you move up to a rotary processor, you use a little over half the chemicals you use by hand
processing.
Technical Specifications/Capacities:
Item# Description Special Features
1510 One-Reel Film Tank Comes complete with one #1501 reel
1520 Two-Reel Film Tank Comes complete with one #1501 reel
1530
Three-Reel Extension
Module
Add this module to the #1510 or #1520 tank to increase the
per run capacity
To Next Page
Loading...
Need help?
General
