6
2 INSTALLATION
2.1 Installation and connection
Vivaldi 15 Vivaldi 25
1. Position the organ on a stable,
horizontal surface.
2. Lean the organ slightly backward.
3. Slide the pedalboard (A) against the
organ (B).
4. Set the organ upright.
5. Put the music desk (E) in the groove
on the cover of the organ.
6. Place the organ bench over the
pedal.
7. Make sure the voltage of the organ
matches the voltage of the mains.
See the serial plate (F).
8. Connect the organ to an earthed
power socket.
9. Put the appropriate key in the rolltop
cover lock (D).
10. Turn the key a quarter turn to the left.
11. Slide the rolltop cover (C) upward.
Vivaldi 35
To Next Page
Loading...
Need help?
General
