John Bean B400 - Safety; 1.0 Safety; 1.1 Typographical conventions; 1.2 Manuals for the unit

6
1-1
P/N: EAZ0033G02A
IMPORTANT!!
CONSERVER LES PRÉSENTES INSTRUCTIONS
Safety
1.0 Safety
The Safety Precautions should be fully understood and
observed by every operator. The Operator’s Manual
will contain specific warnings and cautions when
dangerous situations may be encountered during the
procedures described.
Important safety precautions relevant to the unit are
described in the Safety Booklet, refer to Figure 1 – 1.
We suggest you store (a copy) of the Safety Booklet
near the unit, within easy reach of the operator.
 
This manual contains text styles intended to make the
reader pay extra attention:
Note: Suggestion or explanation.
CAUTION: INDICATES THAT THE FOLLOWING
ACTION MAY RESULT IN DAMAGE TO THE UNIT
OR OBJECTS ATTACHED TO IT.
WARNING: INDICATES THAT THE FOLLOWING
ACTION MAY RESULT IN (SERIOUS) INJURY TO
THE OPERATOR OR OTHERS.
• Bulleted list:
• Indicates that action must be taken by the operator
before proceeding to the next step in the sequence.
TOPIC (
 n°) = see the Chapter number.
The topic indicated is explained in full in the charter
specier.
 
The unit includes the following documentation:
- Safety Booklet (standard supplement)
- Operator’s Manual
The operator must learn in detail the instructions
contained in the manual and meticulously observe
the WARNING notes.
- Spare Parts Booklet
Document used only by the Technical Support staff.
Installation instructions
The installation instructions are in the Appendix of
the Operator Manual.
EC Declaration of Conformity
The EC Declaration is included in the Spare Parts
Booklet.
IMPORTANT!!
SAVE THESE INSTRUCTIONS
¡ IMPORTANTE !
CONSERVE ESTAS INSTRUCCIONES
....
The unit includes the following documentation:
- Operator’s Manual (Chapter 1 – 9)
The operator must be familiar with it.
- Spare Parts Booklet
Document used only by the Technical Support staff.
Installation instructions
The installation instructions are in the Appendix of
the Operator Manual.
EC Declaration of Conformity
The EC Declaration is included in the Spare Parts
Booklet.
Installation instructions
The installation instructions are in Chapter 9,
Appendices.