Johnson Controls 22 SEER

To Previous Page

Subject to change without notice. Published in U.S.A. 898841-UIM-B-0113

York International Corp.

5005 York Drive

Norman, OK 73069

NOTES

Main Page

Default Chapter1
- Table of Contents1
- Installation Manual1
General2
Safety2
Shipping and Packaging List2
Required Installation Tools (Not Supplied)3
Selecting the Installation Location3
- Indoor Clearances3
- Indoor Parts3
- Outdoor Parts3
- Prevailing Wind Barrier4
- Clearances for Outdoor Unit4
Specifications5
- Condensate Drainage5
- Air Conditioner Electrical Specifications5
Refrigerant Line Set Requirements6
- Heat Pump Electrical Specifications6
- Insulation Thickness & Material Information6
- Typical System Components7
- Refrigerant Line Set Requirements7
Unit Dimensions8
- Indoor Unit Mounting Brackets with Weights & Dimensions8
- Outdoor Unit Weights & Dimensions8
- Indoor Unit Dimensions8
- Outdoor Unit Dimensions8
Torque Requirements for Caps and Fastners9
Indoor Unit Installation9
Indoor Unit Wiring Connections9
- Mounting Bracket Spots9
- Masonry Applications9
- PVC Wall Sleeve Installation9
- Caps and Fasteners Torque Requirements9
Pipe Forming and Drain Piping10
- Indoor Unit Wall Mounting Bracket10
- Indoor Electrical Wiring Connections10
- Drain Piping Outlets Option10
- Wire Color Reference10
- Proper and Improper Drain Piping11
- Left or Right Side Exits11
- Right or Right Rear Piping11
- Left or Left Rear Piping11
- Drain Hose Extension12
- Drain Hose Insulation12
- Pipe Cutting Approved Method12
- Deburring Line Set12
- Flaring Tools12
- Proper and Improper Flaring12
Flaring Work and Piping Connections12
- Connections at Indoor Unit13
- Flare Nuts Tighting13
- Indoor Unit Attachment to Mounting Bracket13
- Proper and Improper Drain Hose Installation Application13
- Indoor Unit Removal13
Indoor Unit Installation13
Outdoor Unit Installation13
- Flare Nut Torque Recommendations13
- Outdoor Unit Installation14
- Outdoor Unit Slab or Frame Installation14
- Outdoor Unit Electrical Connections14
Outdoor Unit Wiring Connections14
- Outdoor Unit Wiring Terminal Designations15
- Indoor/Outdoor Piping Connections15
- Outdoor Line Set Connections15
Purging Procedure, Leak Test and Test Run16
- Line Set Connection Insulation and Taping16
- Utility Bundle16
- Exterior Wall Utility Cover (Optional)16
- Service Valve Operation17
- Gauge Set Connections for Test Leaks, Evacuation Charging17
Test Operation18
Emergency Operation18
Maintenance18
Installation and Maintenance of Healthy Filter (Accessory)18
- Leak Test Line Set Connection18
Typical Unit Wiring Diagram19
- Filter Replacement19
- 12K 115V Outdoor Air Conditioners19
- 12K Outdoor Air Conditioners20
- 24K 115V Indoor Air Conditioners20
- 24K Indoor Air Conditioners21
- Outdoor Air Conditioners21
- Indoor Air Conditioners22
- Outdoor Air Conditioners22
- Indoor Air Conditioners23
- Outdoor Air Conditioners23
- Indoor Air Conditioners24
- 12K 115V Outdoor Heat Pumps24
- 12K Outdoor Heat Pumps25
- 24K 115V Heat Pumps25
- 24K Indoor Heat Pumps26
- Outdoor Heat Pumps26
- Indoor Heat Pumps27
- Outdoor Heat Pumps27
- Indoor Heat Pumps28
- Outdoor Heat Pumps28
- Indoor Heat Pumps29
- Outdoor Heat Pumps29
- Indoor Heat Pumps30
Indoor and Outdoor Units Error Codes31
- Indoor Unit Front Panel Indicators31
- Control Board31
- Error Codes - 09K 12K32
- Error Codes - 18K 24K37
- Error Codes - 30K 36K41
- Uim-B42

Johnson Controls 22 SEER - Page 46

Table of Contents

Related product manuals