Need help?Do you have a question about the Johnson Controls IFC-320 and is the answer not in the manual?
General| Model | IFC-320 |
|---|---|
| Type | Control Panel |
| Total System Power | 7.0 A @ 24 VDC |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Enclosure Rating | NEMA 1 |
| Compatibility | Compatible with IFS detectors and modules |
Explanation of the Signaling Line Circuit (SLC) and its function.
Description of FlashScan and CLIP polling protocols for device communication.
Introduces various addressable devices used on the SLC loop.
Guidelines for recommended SLC wire types and limitations.
Details for wiring two-wire SLC circuits according to NFPA Style 4.
Wiring requirements for four-wire SLC circuits in Style 6 and 7.
Details on the M500XJ fault isolator module and its function.
Explanation of how isolator detector bases prevent loop disablement.
Details on the M300MJ addressable monitor module.
Information on the M302MJ zone interface module.
Instructions on setting the SLC address for modules using rotary switches.
Typical wiring for NFPA Style B IDC using M300MJ monitor module.
Typical wiring for NFPA Style D IDC using M300MJ monitor module.
Connections for wiring the M300CJ module for a 24 VDC NAC.
Instructions for wiring the M300CJ-REL module to a solenoid.
Wiring a supervised NFPA Style Y NAC using the M300CJ module.
Wiring a supervised NFPA Style Z NAC using the M300CJ module.
How to connect releasing devices to the M300CJ-REL module.
Wiring diagram for the M300RJ module to the control panel.
Calculations for allowable resistance in supplying 24 VDC power.
Options for supervising 24 VDC power supply.
To Next Page