User Information:
- The installer should advise the user and note in the User’s Manual
- Service organization name and telephone number
- The programmed exit and entry time
- Instructions to test system weekly
- Note that the installer code cannot arm or disarm the system
- The installer should caution the user not to give system information (e.g., codes, bypass methods, etc.) to casual users
(e.g., service people) and to only give out codes set to expire within 24 hours
- Identification of the conditions that might be expected to result in false alarms or impaired operation of the product(s):
arming the system and not respecting the exit delay, entering the protected premises and not respecting the entry
delay for disarming the system can cause false alarms.
To Next Page
Loading...