SRF Jam Sensitivity Level
NOTE: Not evaluated for UK or CE/EN Grade 2
Choose between HIGH and NORMAL sensitivity levels.
Zigbeen Jam Sensitivity Level
Allow Master Code to Access Security
Sensors
Allow the Master Code to access to the Security Sensor icon, including Auto Learn
Sensor, Add Sensor, Edit Sensor, Delete Sensor, Sensor Status & Sensor Group.
Open/Close Reports Allowed For
Auto Learn
Rather than sending a tamper to auto learn a sensor, enabling this will allow an open/
close of the sensor to trigger auto learn.
Panel Glass Break Detector
NOTE: Not evaluated for UK or CE/EN Grade 2
Creates an independent zone that leverages the panel’s built-in microphones to act as a
glass break detector. This will fall into the zone order at the time you enable this feature.
NOTE: This feature can not be Enabled if Panel Ambient Noise Detection is Enabled.
Panel Ambient Noise Detector
When Enabled, the Panel's built-in microphones can monitor for loud noise detection
above a settable dB threshold and generate an alert. Useful for MDU, apartments and
short term rentals where noise complaints are a concern. After an alert is generated, a 30
second cool down period is instituted. NOTE: This feature can not be Enabled if Panel Glass Break
Detector is Enabled.
INSTALLER/DEALER SETTINGS
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 35 198
To Next Page
Loading...