Johnson Controls IQ4 HUB - Page 37

Setting
Default
Description
System Health Check as Default
Home Screen
Disabled
Panel home screen defaults to the System Health Check page if troubles exist.
Delete All Sensors
Deletes all security sensors and Bluetooth devices programmed in the panel.
Delete All Z-Wave Devices
Performs a factory reset on the Z-Wave controller. Does not factory reset previously included devices.
Zigbee Reset
Deletes all Zigbee sensors and resets the Zigbee Network.
Master Reset*
Restores panel to factory settings and erases all content.
Data Recycle
This feature erases all User data previously stored. (Wi-Fi SSID & Password, User Codes, Custom Photo Frame
Images, Message Center & Panel Event History).
IQ Remote Reset Authentication
Disabled
If Enabled, the IQ Remote will require authentication (Dealer or Installer Code) to master
reset it.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 37 198
INSTALLER/DEALER SETTINGS
PROGRAMMING