Table 18: Modbus accessories ordering information
Product Code Number Description
IU-9100-8401 (Europe)
RS232-to-RS485 converter, 230 VAC
Order this accessory in AOMS from the Essen Distribution Center.
IU-9100-8404 (Europe) or
BM485-CIP (North America)
RS232-to-RS485 converter, 24 VAC
For the European market, order this accessory in AOMS from the Essen
Distribution Center. For the North American market, order this accessory from
duTec (http://www.interfaceconverter.com or 1-800-248-1632), specify vendor
#290904
Table 19: M-Bus accessories ordering information
Product Code Number Description
SIS-MBUSSCSL-0E M-Bus level converter for up to 6 unit loads, 24V AC/DC (RS-232 connection)
SIS-MBUSSCLL-0E M-Bus level converter for up to 100 unit loads, 24V AC/DC (RS-232 connection)
SIS-MBUSNCLL-0E M-Bus level converter for up to 100 unit loads; 24 VAC/VDC (IP connection)
SIS-MBUSNCLH-0E M-Bus level converter for up to 100 unit loads; 230 VAC (IP connection)
SIS-MBUSRPLL-0E M-Bus repeater for up to 100 unit loads, 24V AC/DC
SIS-MBUSRPLH-0E M-Bus repeater for up to 100 unit loads; 230 VAC
INT-DX-KAB01 Optional connection cable SUB-D to RJ-12 for use with SIS-MBUSSCLL-0E
Note: Order these accessories in AOMS from the Essen Distribution Center.
Table 20: KNX accessories ordering information
Product Code Number Description
SIS-KNXNIXL-0E
KNX IP interface module to connect KNX line through Ethernet to a network
engine
SIS-KNXNRXL-0E
KNX IP router to connect KNX line through Ethernet to a network engine,
including line or area coupler functionality
Note: Order this accessory in AOMS from the Essen Distribution Center.
Table 21: Modbus training tool ordering information
Course number Course title and description
C-10077-EN
VGE Tool Software Training (North America)
The VGE tool is required to generate custom Modbus mapping tables.
PTK-CONT-26
VGE Tool Software Software Training (Europe and Asia)
The VGE tool is required to generate custom Modbus mapping tables.
Note: Modbus Integrations require one or more vendor Modbus definition (VMD) tables for specific
third-party equipment. You can purchase tables from your regional System Integration Services (SIS)
office, or you can create the tables with the VMD Generator Express (VGE) tool. To obtain a license,
attend the training listed in this table.
Technical specifications
NAE55/NIE55 Installation Guide 23
To Next Page
Loading...
