CKM-CE75-E1M Introduction
24-10707-112 Rev. D
1-1
1. INTRODUCTION
Use the information in this manual to install, wire, and maintain the
CKM-CE75-E1M enclosure with power supply.
M
ANUAL SUMMARY
This document consists of the following chapters and appendix:
• Chapter 1: Introduction, describes the scope of this manual, lists important
warnings and cautions, and describes standard features of the FlexPower
Power Management System.
• Chapter 2: Hardware Information, provides hardware information for the
CKM-FPO75-E1M enclosure with power supply.
• Chapter 3: Installation and Wiring, provides detailed mounting and wiring
information.
• Chapter 4: Fire Alarm Interface Input, provides instructions about the Fire
Alarm Interface (FAI) input.
• Chapter 5: Operations and Maintenance, provides instructions for powering
up, basic system verification, and maintenance.
• Appendix A: Troubleshooting, provides a list of problem conditions, their
possible causes, and suggested solutions.
I
MPORTANT INSTALLATION INFORMATION
Observe the following installation notes:
• Perform the installation only if you are a member of qualified service
personnel.
• Conform to all local codes.
• Install equipment in a manner that prevents unintentional operation by
employees, cleaning personnel, or others working in the premises, as well
as by falling objects, customers, building vibration, or similar causes.
• To ensure proper operation, test the system and any batteries at least once
per year.
To Next Page
Loading...
