Johnson Controls TEC3612 - General Setup and Control Parameters; Table 7: Setup Menu Sections; General Setup Options; Control Mode Configuration

Table 7: Menus and submenus
Level 1 Level 2 Level 3
Control Mode
Unit Enable
Fan Mode*
Max Setpoint Offset
Fan On Delay*
Fan Off Delay*
Frost Protection
Dehum Enable*
Unocc Dehum Enable
Dehumidification Sequence Mode*
Aux Mode
Load Shed Rate Limit
Load Shed Adjust
Fan Alarm Delay
Fan Alarm Action*
Fan Alarm Reset*
Fan Runtime Limit
Fan Runtime Reset*
Supply Air Temperature Alarm Offset
Supply Air Temperature Alarm Delay*
Unocc Low Speed Fan
Scheduled Circulation Enable
Scheduled Circulation Only when Occupied
Mininum Hourly Fan Runtime
Variable Speed Fan Circulation Setpoint*
General Setup
Multi-speed Fan Circulation Setpoint*
BI1 Config
BI2 Config
Supply Temp Type*
Supply Temp Sensor*
Supply Temp Offset*
Zone Temp Sensor
Zone Temp Offset
Humidity Offset
Reset Sensors
For networked models:
Zone Temp Alarm Enabled
For networked models:
Zone Temp Low Limit
Setup
Input Setup
For networked models:
Zone Temp High Limit
TEC3000 Series On/Off or Floating Fan Coil Thermostats Quick Start Guide18