EasyManua.ls Logo

Johnson Controls TIWM008B22S - User Manual

Johnson Controls TIWM008B22S
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
P5417089
Operation
Manual
INVERTER-DRIVEN
MULTI-SPLIT SYSTEM
HEAT PUMP
AIR CONDITIONERS
IMPORTANT:
READ AND UNDERSTAND
THIS MANUAL BEFORE
USING THIS HEAT PUMP
AIR CONDITIONER.
KEEP THIS MANUAL FOR
FUTURE REFERENCE.
Type Model
Wall Mount
TIWM006B22S
TIWM008B22S
TIWM012B22S
TIWM015B22S
TIWM018B22S
TIWM024B22S
TIWM030B22S

Table of Contents

Questions and Answers

  • P
    Patricia GallagherAug 13, 2025
    What to do if my Johnson Controls Air Conditioner operation stopped?
    • F
      fjohnsonAug 14, 2025
      If your Johnson Controls Air Conditioner has stopped operating, this could be due to the micro-computer being activated to protect the device from electromagnetic waves. In this case, try restarting the operation. Also, if there was a power failure, try restarting the operation. Note that if the power failure was very brief (within two seconds), the unit should restart automatically.
  • M
    malonealexanderAug 17, 2025
    Why does my Johnson Controls TIWM008B22S smell?
    • M
      montoyahaileyAug 17, 2025
      If you notice an odor coming from your Johnson Controls Air Conditioner indoor unit, it might be due to cigarette smoke that has infiltrated the unit. To resolve this, ventilate the unit well in fan mode and clean the air filter, the air outlet, and the air inlet grille.
  • A
    Alex BellAug 21, 2025
    Why is there mist coming from my Johnson Controls TIWM008B22S?
    • A
      Aimee JohnsonAug 21, 2025
      Mist coming from your Johnson Controls Air Conditioner indoor unit can occur due to several reasons. It might be caused by oil attached to the fins decreasing heat exchange efficiency, or when the air outlet temperature becomes lower. To address this, you can try changing the operation mode. You can also raise the set temperature and the air flow volume.
  • J
    James JonesAug 25, 2025
    Why is my Johnson Controls Air Conditioner making noise?
    • M
      Meghan WoodAug 25, 2025
      The sound from your Johnson Controls Air Conditioner indoor unit can be generated for several reasons: the components are rubbing against each other due to the extension and contraction of the resin parts caused by the temperature change; when the refrigerant flows or the drain-up mechanism drains water; or the fan motor makes temporary sound by change of fan speed.
  • P
    phillipskaylaAug 29, 2025
    Why is there white steam from my Johnson Controls TIWM008B22S Air Conditioner?
    • C
      Courtney WilsonAug 29, 2025
      White steam from your Johnson Controls Air Conditioner indoor unit may occur if dust attached to the heat exchanger has dried.
  • N
    nancy81Sep 1, 2025
    Why is there white smoke from my Johnson Controls TIWM008B22S?
    • R
      Rebecca HernandezSep 1, 2025
      White smoke from your Johnson Controls Air Conditioner indoor unit might occur when dust attached to the heat exchanger has dried.
  • M
    mossericSep 5, 2025
    Why is there condensation on my Johnson Controls TIWM008B22S Air Conditioner?
    • D
      David ColeSep 5, 2025
      Condensation on the front panel of your Johnson Controls Air Conditioner might occur when the operation is performed in a humid location (relative humidity is approximately 80%) over a prolonged period of time.
  • S
    Scott MillerSep 9, 2025
    Why is there temperature irregularity in my Johnson Controls TIWM008B22S Air Conditioner?
    • E
      Erik TorresSep 9, 2025
      Temperature irregularity in your Johnson Controls Air Conditioner might occur for structural reasons, such as the size of the air outlet and the location of the heat exchanger.

Summary

Safety Instructions

General Safety Precautions

Provides essential safety guidelines for installation, handling, and operation.

Safety for Repair, Relocation, Removal

Safety warnings and precautions for repairing, moving, or removing the unit.

Safety for General Maintenance

Safety warnings and precautions for general maintenance and handling components.

Operation Methods

Wired Controller Basic Operation

Explains basic operations, item selection, and setting changes on the wired controller.

Wired Controller Mode Operations

How to operate the unit in cooling, heating, and fan modes using the wired controller.

Wired Controller Temp & Fan Speed

How to adjust temperature and fan speed using the wired controller.

Wired Controller Start;Stop Operation

How to start and stop the unit using the wired controller.

Wired Controller Louver Control

Wired Controller Comfort Setting

Wired Controller Auto Mode

Wired Controller Setback Operation

Wireless Controller Operations

Wireless Controller Mode Selection

Wireless Controller Temp, Fan, Airflow

How to set temperature, fan speed, and airflow direction with the wireless controller.

Wireless Controller Auto Mode

Wireless Controller Timer Settings

Wireless Controller Louver Control

Maintenance Procedures

Daily Maintenance: Air Filter Cleaning

Instructions for cleaning the air filter when the filter sign indicator is on.

Maintenance: Flat Panel Cleaning

Troubleshooting Guide

Troubleshooting: Non-Abnormal Issues

Troubleshooting: Before Contacting Support

Checkpoints and actions to take before contacting a service contractor.

Alarm Code Reference

Johnson Controls TIWM008B22S Specifications

General IconGeneral
BrandJohnson Controls
ModelTIWM008B22S
CategoryAir Conditioner
LanguageEnglish

Related product manuals