Need help?Do you have a question about the Johnson Controls TSS and is the answer not in the manual?
General| Brand | Johnson Controls |
|---|---|
| Model | TSS |
| Category | Air Conditioner |
| Language | English |
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Identifies a hazard which could lead to damage to the machine, other equipment, or environmental pollution.
All power must be disconnected prior to installation and servicing this equipment. Disconnect all power sources.
Electric resistance heating elements must be disconnected prior to servicing to avoid burns.
Check that rigging and lifting equipment can safely support the unit assembly and component weights.
Do not use flow sensor, connecting tubes, coil stubouts or damper shaft as handles when lifting equipment.
Do not handle equipment's heating elements, as permanent damage may occur.
Do not use flow sensor, connecting tubes, coil stubouts or damper shaft as handles when lifting equipment.
Do not handle equipment's heating elements, as permanent damage may occur.
Provides recommendations for suspending and mounting equipment, emphasizing structural support.
Emphasizes safety precautions and the need for qualified individuals during start-up and service.
Emphasizes caution with lethal voltages and verifying wiring and input signals.
Details interface model responses to input signals for troubleshooting SSR operation.
Guides on verifying pulse input signals for ETPHCC/ETPHCC1 modules, checking LED and voltage.
Troubleshooting steps if the heater remains energized when power is applied.
To Next Page