Johnson Controls tyco iSTAR Edge G2 User Manual

Overview
The iSTAR Edge G2 Controller is supported on C•CURE 9000 version 2.80 and later with firmware version 6.8.x.
UL Listed Models
Part Number Description
GSTAR004 iSTAR Edge G2, 4 readers, in metal enclosure
GSTAR004-MB iSTAR Edge G2, 4 readers, board only
GSTAR004-MBP iSTAR Edge G2, 4 readers, board only w/PoE
GSTAR004-POE iSTAR Edge G2, 4 readers, metal encl, PoE+
GSTAR004-RM iSTAR Edge G2, 4 readers, metal encl, with 2 RM-4
Table 1:iSTAR and Components Wiring Specifications
NOTE
• All controllers and networking equipment in a cluster must be UL listed to qualify as UL Listed
Products.
• USB has not been evaluated by UL.
• iSTAR Edge LCD display, and associated diagnostic tests, have not been evaluated by UL.
Compatible Readers
■ RM2L-PI
■ RM1 series
■ RM2 series
■ RM3 series
■ RM2L-4000
■ SWH-4200, SWH-4000, SWH-2100, SWH-3100, SWH-4100, SWH-5100, P345MTR, SWH-5200, P345KPMTR
■ Touchscreen card reader
■ OSDP-formatted readers
NOTE
iClass and Mifare credential formats are not evaluated by UL.
2

Johnson Controls tyco iSTAR Edge G2 Specifications

General

Brand	Johnson Controls
Model	tyco iSTAR Edge G2
Category	Controller
Language	English