Chiller starting sequence and shutdown sequence
Figure 6: Chiller starting sequence and shutdown sequence (EM starter and solid state
starter)
Note: ** Not for all shutdowns. Refer to Display Messages in the manual OptiView
™
Control
Center – Operation and Maintenance (Form 160.54-O1).
Figure 7: Chiller starting sequence and shutdown sequence (variable speed drive)
Note: ** Not for all shutdowns. Refer to Display Messages in the manual OptiView
™
Control
Center – Operation and Maintenance (Form 160.54-O1).
Model YK Style G R-134a or R-513A14