Johnson Controls York YD - Conditioned Based Maintenance

Manual description Form number
Wiring Diagram - Field Connections YD - Mod D with Low Voltage E-M
Starter
160.79-PW4
Wiring Diagram - YD - Mod D with OptiView Control and Modbus SSS/VSD 160.79-PW5
Wiring Diagram - Field Connections YD - Mod D with Unit Mounted Low
Voltage SSS
160.79-PW6
Wiring Diagram - Field Connections YD - Mod D with Unit Mounted Low
Voltage VSD
160.79-PW7
Wiring Diagram - Field Connections YD - Mod D with Unit Mounted Medium
Voltage SSS
160.79-PW8
Wiring Diagram - Field Connections YD - Mod D with Remote Mounted
Medium Voltage SSS
160.79-PW9
Wiring Diagram - Field Connections YD - Mod D with Remote Mounted
Medium Voltage VSD
160.79-PW10
Wiring Diagram - YD Mod D Chiller with OptiView Control Center and Motor
Monitoring
160.79-PW11
Wiring Diagram - YD Mod D Chillers with OptiView Control Center and
Motor Heater
160.79-PW12
OptiView Renewal Parts - YD Mod D
solutionnavigator.co
m
Unit Renewal Parts - YD Mod D
solutionnavigator.co
m
K1, K2, K3, K4 and K7 Compressor Part Guide 160.75-RP2
Conditioned based maintenance
Traditional chiller maintenance is based upon assumed and generalized conditions. In lieu of
the traditional maintenance program, a Johnson Controls YORK Conditioned Based Maintenance
(CBM) program can be substituted. This CBM service plan is built around the specific needs for
the chiller, operating conditions, and annualized impact realized by the chiller. Your local Johnson
Controls Branch can propose a customized Planned Service Agreement that leverages real time
and historical data, delivering performance reporting, corrective actions required and data enabled
guidance for optimal operation and lifecycle assurance. The program will include fault detection
diagnostics, operation code statistics, performance based algorithms and advance rules based
rationale delivered by the Johnson Controls Connected Equipment Portal.
7Model YD Mod D with OptiView Control Center