10 ©2019 Johnson Level & Tool - Rev. 3
Charging directly to rechargeable battery pack
Charging to the laser
Note:
When the power indicator light is flashing on the laser, the battery is
low. Charge the rechargeable battery every two or three months
if the laser will be unused for a long period of time.
Before Using Your Laser
When you charge the new battery or one which has not been used
for long periods of time, it may not reach full charge until after
you have discharged and recharged it several times.
Instrument Usage
1. Put in Ni-MH rechargeable battery pack, or 4 “C” alkaline batteries
(not included, except in 40-6526), or connect the 6.4V DC battery
adapter to the unit’s power jack.
2. Place the laser on a platform or tripod, connecting with tripod to
the 5/8" screw thread at the bottom of the instrument.
Note: If the laser is inclined beyond the self-leveling range, the
laser will deliver an audible alarm. You will need to re-position the
laser inside of its self-leveling range.
3. Press power button to turn power on, and press operation buttons
on control panel or use remote control (not included with 40-6526)
To Next Page
Loading...
