16 ©2016 Johnson Level & Tool - Rev. 2
(j) Detector Maintenance
• When you are done using the detector, return it to its packing case.
• Keep the detector, particularly the detecting window, clean. If unit
becomes dusty, use a clean cloth to gently wipe it clean.
• Avoid knocking the detector over or allowing it to fall on the
ground.
• Although the detector is rain resistant, you should avoid submerg-
ing the unit in water or other liquids. If detector comes into contact
with water or other liquids, wipe it dry immediately.
• Do not use the detector around fire or expose it to fire in any way.
1625i-English_Manuals 12/28/16 9:41 AM Page 16
To Next Page
Loading...
