10
PART 3 - USING YOUR CONSOLE
PROGRAMMABLE CONSOLE
Your Johnson computer console offers variety of different profiles. These
profiles are designed to mak e each ex ercise session enjoyable while you
make progress toward your personal fit ness goal.
TURN POWER ON
The On/Off switch for your treadmill is located next to the power supply
cord plug in. Flip the switch to the "ON" position. You will hear a beep and
the console will light up. You are ready to use your console.
Safety Button
Once the Safety Button being pressed the treadmill shuts down if running
a program. The treadmill displays "...." in the time window indicating that
thd safety Button is pushed. This is a safety precaution to warn the user
that power is still being applied to the board. This safety button condition
occurs in any mode, including engineering modes.
When the Safety Button being pressed, the board resets. Any activity or
program run time information prior to the reconnection will be lost.
DO NOT STAND ON THE BELT
While you are preparing to use the Treadmill, do not stand on the belt.
Place your feet on the sides of the treadmill deck. Start walking on the belt
only af ter the belt has begun to move. Never start the treadmill at a run -
ning speed and attempt to get on while it is moving fast.
DO NOT STAND ON THE BELT
While you are preparing to use the Treadmill, do not stand on the belt.
Place your feet on the sides of the treadmill deck. Start walking on the belt
only af ter the belt has begun to move. Never start the treadmill at a run -
ning speed and attempt to get on while it is moving fast.
To Next Page
Loading...
