9
PART 3 - USING YOUR CONSOLE
PROGRAMMABLE CONSOLE
Your Johnson computer console offers variety of different profiles. These
profiles are designed to mak e each ex ercise session enjoyable while you
make progress toward your personal fit ness goal.
TURN POWER ON
The On/Off switch for your treadmill is located next to the power supply
cord plug in. Flip the switch to the "ON" position. You will hear a beep and
the console will light up. You are ready to use your console.
Safety Button
Once the Safety Button being pressed the treadmill shuts down if running
a program. The treadmill displays "...." in the time window indicating that
the Safety Button is pushed. This is a safety precaution to warn the user
that power is still being applied to the board. This safety button condition
occurs in any mode, including engineering modes.
When the Safety Button being pressed, the board resets. Any activity or
program run time information prior to the reconnection will be lost.
POWER CORD AND SWITCH
Plug the power cord into the plug receptacle located at the front of the
treadmill deck. Plug the cord into a grounded 220V/110V wall sock et and
turn the power switch on.
USE DEDICATED CIRCUIT
The outlet selected should be a dedicated circuit. It is particularly impor -
tant that no sensitive electrical equipment, such as computer or TVs, share
the same circuit.
To Next Page
Loading...
