CHAPTER 6:PARTS REPLACEMENT
6.4 Footrest
To replace the leg massage portion you’ll need zip ties (medium and small size), something to
cut zip ties, wrenches, screwdriver, and other misc. tools.
1) Remove the panel underneath the foot rest, to do this use the controller to elevate the
leg-rest up.To remove the panel push in the center part of the buttons displayed below, this will pop
them out and allow the panel to be removed.
2) Disconnect the air-hoses and foot heater power cord.
Note :When re-installing the new unit, remember where the power cord plugs into.
To Next Page
Loading...