THE LIST OF MANAGER'S CUSTOM MODE
P0
P1
P2
P3
P4
P5
P6
P7
P8
99 min
20 min
1
68kg /
150lbs
30
20kph /
12mph
15
N/A N/A N/A N/A
km/
mile
N/A N/A N/A N/Ahour
10 min
10 min
1
34kg /
75lbs
10
6.4kph /
4mph
4
99 min minute
99 min
10
182kg /
400lbs
99
20kph /
12mph
15
MAXIMUM
TIME
DEFAULT
TIME
DEFAULT
LEVEL
DEFAULT
WEIGHT
DEFAULT
AGE
MAXIMUM
SPEED
MAXIMUM
INCLINE
ACCUMU-
LATED
DISTANCE
ACCUMU-
LATED
TIME
CUSTOM
SETTING
3938
DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION
This option controls the default program
time.
This option controls the default program
level.
This option controls the default users age
used in the target heart rate calculations.
This option changes the maximum incline
grade to 4%, 8%, 12% or 15%.
This option enables fitness club managers
to set the program maximum workout
duration limits during peak and non-peak
hours of club traffic. Active variable
displayed in the TIME display after change.
This option controls the default weight
used in the calorie calculations. Sets to
default unit change (kilograms or
pounds). Displayed in native units.
Controls the maximum speed for all
programs. Displayed in native units
(kilometers per hour or miles per hour).
Reverts to default value on unit change.
Accumulated distance is not editable, for
display only. Displayed in native units
( miles or kilometers ). Holding the
INCLINE and SPEED keys simultanously
to reset the accumulated distance. After
the treadmill reaches the maximum
distance, it will reset to “0” automatically.
1
minute
1
1
1
n/a
kg/lbs
1
kph/
mph
1
age
N/A
%
Accumulated distance is not editable, for
display only. Displayed in native units
( miles or kilometers ). Holding the
INCLINE and SPEED keys simultanously
to reset the accumulated distance. After
the treadmill reaches the maximum
distance, it will reset to “0” automatically.
P9
P10
P11
P12
P13
P14
P14-1
P16
0.8kph/
0.5mph
0.8kph/
0.5mph
3kph/
1.8mph
kph/
mph
60 sec
30 sec 180 sec
START
SPEED
PAUSE
TIME
SOFTWARE
VERSION
UNITS
MAINTENANCE
LAMP
LANGUAGE
AUTO
CHECK
CUSTOM
SETTING
DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION
This is the maximum time during which
a workout can remain in pause mode.
The language of the INSTRUCTION CENTER
display.
The measurement unit type for weight,
distance, and speed.
Controls the starting speed for all
programs (minimum speed not affected).
Displayed in native units (kilometers per
hour or miles per hour). Reverts to default
value on unit change.
Software version is not editable, for
display only.
This option enables fitness club managers
to set the maintenance lamp as ON/OFF.
When the treadmill's accumulated
distance reaches the certain kilometers
or miles, the maintenance lamp will light
meaning maintenance is needed.
The option is to customize the color in the
speed leading light located on the side
rails, while the power is ON. Color display
options include green, white, sky blue,
yellow, blue, purple and red. (T8000 PRO
Only)
Error log is not editable, for display only.
Holding the INCLINE and SPEED keys
simultaneously to erase error log.
The function would clear all custom
settings had stored on the unit as a default
value. Holding the INCLINE and SPEED
key simul-taneously to clear all custom
setting as a default value.
The function is only for manufacturer
use.
The function is to calibrate the treadmill’s
speed and incline after the completion of
the installation.
0.1
second
1
English
N/A N/A
N/A
N/A
N/A
N/A N/A
N/A
N/A
Metric
Metric English
N/A
N/A
ON
ON OFF
N/A
N/A
P15
BLUE
N/A N/A
N/A
N/A
N/A
N/A N/A
N/A
N/A
P17
ERROR
LOG
N/A
N/A N/A
N/A
N/A
P19
RESET ALL
N/A
N/A N/A
N/A
N/A
P20
MANUFAC-
TURING
TEST
N/A
N/A N/A
N/A
N/A
If this option is “ON”, the METs prompt
will display on the Instruction Center in
each 30 second. (T8000 only)
P18
METS
OFF ON OFF N/A N/A
MAIN-
TENANCE
DISTANCE
SPEED
LEADING
LIGHT
4000
km/
2500
miles
4000
km/
2500
miles
8000
km/
5000
miles
km/
miles
10
JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO
To Next Page
Loading...
Need help?
General
