Supply Voltage Frequency Rated Current (Amps)
100
120
200
220
230
240+
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
15
15
10
10
10
10
15
15
8
8
8
8
CENTERING THE BELT
After installing and leveling the treadmill, check the belt to ensure that it is tracking
properly. The belt might need to be adjusted after the first two hours of use. If the belt
needs to be adjusted, please see at the section of
MAINTENANCE
for details.
ELECTRICAL POWER REQUIREMENT
The Johnson Fitness Treadmill requires a dedicated line according to the electrical
configurations listed in the chart below. It is particularly important that no sensitive
electrical equipment, such as a computer or a TV, shares the same circuit.
GROUNDING INSTRUCTIONS
The Johnson Treadmill must be properly grounded. If the product malfunctions or breaks
down, proper grounding provides a path of least resistance for the electric current to
reduce the risk of electrical shock. This product is equipped with an electrical cord, which
includes an equipment grounding conductor and a grounding plug. The plug must be
inserted into an outlet that has been properly installed and grounded in accordance with
all local codes and ordinances.
DANGER: Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or service provider
if you are in doubt as to whether or not the product is properly grounded. DO NOT
modify the plug provided with the product. If it will not fit an electrical outlet, have a
proper outlet installed by a qualified electrician. Any modification to the electrical plug will
result in a voided warranty.
UNPACKING THE JOHNSON TREADMILL
The Johnson treadmill is carefully inspected before it is packaged. It is shipped in four
pieces: the frame base, the upright console supports, the console, the foam rubber
handles and the hardware kit. Carefully unpack the unit and dispose of the box material.
CAUTION: This unit weighs 165 kg / 365 lbs. To avoid injury to the user and the unit,
be sure to have proper assistance to remove and move the unit.
0706
JOHNSON TREADMILL T8000/T8000 PRO JOHNSON TREADMILL T8000/T8000 PRO
(VAC) (Hz)
T8000 T8000 PRO
ADJUSTING THE BELT