1413
SHOULDERS MUST BE
BELOW THIS LINE
Shoulder Strap Height
IMPORTANT: if the baby's neck muscles
are unable to support their head,
they should remain rear facing.
Shoulder Strap Height
The shoulder straps must pass
under the steel bars at the back
of the restraint.
They must not must pass over
the outside of the steel bars
at the back of the restraint.
IMPORTANT
Shoulder Straps must
not be twisted.
3 Pull loose end of harness
loop out through slot and
place in correct slot.
4. Re-attach to splitter plate.
5. Repeat with the other
shoulder strap.
This restraint has a shoulder height level label. Use this to
gauge when your child is too big for the restraint. Once your
child's shoulders reach the dotted line, it is time to move to a
bigger restraint. See page 20.
To Next Page
Loading...
Need help?
General
