JoinTech EVCD2 Series - Important Safety Instructions

USER MANUAL
2
1. Important Safety Instructions
1.1 Overall Warnings & Cautions
WARNING: To avoid fire, injury or death, carefully read and follow the instructions
during installation, operation and maintenance.
- DO NOT put fingers into the electric vehicle connector.
- DO NOT use this product if the flexible power cord or EV cable is frayed,
insulation-broken, or any other signs of damage.
- DO NOT use this product if the enclosure or the EV connector is broken, cracked,
open, or shows any other indication of damage.
- DO NOT re
move cover or attempt to open the enclosure because of risk of electric
shock.
WARNING: This device should be supervised when used around children.
WARNING: This device must be grounded.
WARNING: To avoid a risk of fire or electric shock, do not use this device with an
extension cord.
1.2 Installation Requirements
WARNING: Disconnect electrical power prior to installing the charging station.
WARNING: Be sure to preview the user manual and ensure local building and
electrical codes are reviewed before installing the AC charger.
WARNING: The AC charger should be installed by a qualified technician according to
the user manual and local safety regulations.
CAUTION: Use appropriate protection when connecting to the main power
distribution cable.
CAUTION: Type B, C or D breaker with the rating current for table should be installed
in the upstream AC distribution box.
CAUTION: Please keep the charger in a clean area with low humidity. Not
recommended to be installed in coastal environments with high humidity or high dust.
WARNING & CAUTION