Main features
The controller is arranged for control of the room air fan, for setting
the optimum air delivery level. The ventilation level can be manually
set by the user or in automatic mode.
In automatic setting (possible in the version with temperature probe),
the ventilation level is set according to the fireplace temperature.
A fan operation mode is provided for also with the fireplace off, for
room ventilation.
The user interface is in wired version, already arranged for the
radiofrequency version.
Through the user interface it is possible to set the various operation
modes and identify any faults.
Display of room temperature (with remote control only).
DISPLAY
- Change operation status
Summer/Winter
- Display fan speed in automatic
Increase selected value
in manual programme
Decrease selected value
in manual programme
No communication with fireplace
(with remote control only)
The controller is arranged for
association with the remote control.
norF
Operation programme
AU = Automatic
LX = manual with ventilation
level X (1-9)
OF = Off
RF reception in progress Winter Mode (if not present the
controller is set to Summer mode)
Change operation
programme Off/Manual/Automatic
To Next Page
Loading...
Need help?
General