7
English
to select the TP you want.
3.1.5 FREQUENCY
Frequency of the current transponder, input the value by using the number
keys.
3.1.6 SYMBOL RATE
Symbol rate of the current transponder, input the value by using the number
keys.
3.1.7 POLARISATION
Press
AB
key to change vertical or horizontal of polarization.
3.1.8 22KHZ
Press
AB
key to turn on or o 22kHz TONE Switch.
3.1.9 DISEQC MODE
Press
AB
key to set the type of port as None/DiSEqC1.0/1.1.
3.1.10 DISEQC TYPE & INPUT
In C/Ku Band mode:
we can press
AB
key to set DiSEqC 1.0/1.1 as A/B port, and set Tone Burst
Mode as NONE/Tone Burst A/B.
In Unicable mode:
we can press
AB
key to switch IF Index from 1
to 8, or use number key to modify IF Freq, and
then press
AB
key to select A/B as Sat Position.
3.1.11 LNB POWER
Press
AB
key to Switch LNB Power ON/OFF.
3.1.12 BEEP TONE
Press
AB
key to Switch beep tone ON/OFF. If we open it, the beep of lock
alarm will open when we enter into the search screen.
To Next Page
Loading...