JollyLine multi compact - Page 32

13
English
Press the green key to edit current transponder.
Press the orange key to delete current transponder.
Press the blue key to scan current transponder.
3.6.4 MOTOR SETTING
There are 5 modes in motor setting:
• USALS
Controling motor according to your local position, you can modify it in Angle
Calculation.
• DiSEqC 1.2
There are 64 position you can select to move motor.
• Set East Limit
Move motor to east.
• Set West Limit
Move motor to west.
• Disable Limits
Unlimited movement.
Press the red key to save setting.
Press the green key to reset setting.
3.6.5 EPG
Press
YZ
key to change program. If the current
program has EPG information, it will appear on
the right side of the window. Press
AB
key to
change date of the EPG.