PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT,
THERE IS LED 4-WATT BULB IN THE BOX .
Step 1 Step2 Step3
Pull power cord to connect the Center Tube (B) to the Base (A
Insert the Pole (D) into the Socket Assembly (C). Put the light on a level surface to check
Screw the Center Tube (B) onto the Lamp base (A) Put the shade (E) on the Pole (D),then if everything is stable.
Screw the Socket Assembly (C) onto the Center Tube (B). tighten the Finial (F) into the Pole (D)
Be careful not to twist the power cord and tighten securely Insert the bulb (G) into the socket (C).
ENJOY YOUR LAMP
To Previous Page
Loading...
Need help?
General
