JONATHAN Y JYL3002A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X F Socket 1X
B1 Tube 1X G Harp 1X
B2 Tube 1X H Shade 1X
C plate 1X I Finial 1X
D Metal ball+neck 1X J Bulb
E Saddle 1X
Part List and Hardware List
Model# JYL3002A
Product Dimensions: 16"L X 16"W X 61"H
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the
plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully
inserted. do not attempt to defeat this safety feature.
WARNING
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
CARE AND MAINTENANCE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

JONATHAN Y JYL3002A Specifications

General

Brand	JONATHAN Y
Model	JYL3002A
Category	Outdoor Light
Language	English

Summary

Safety Warnings and Installation Precautions

Electrical Safety During Installation

Recommends installation by a licensed electrician and switching off main power before proceeding.

Pre-Installation Inspection

Instructs users to inspect the item for damage before installation and notes it cannot be returned once installed.

Care and Maintenance Guidelines

Cleaning Procedures

Details methods for cleaning lamp shades and bases, recommending soft cloths and avoiding chemical cleaners.

Important Safety and Assembly Notices

Pre-Assembly Checklist and Safety Notes

Ensures all parts are present, recommends assembly on a soft surface, and provides safety guidelines for cords and plugs.

Product Identification

Part and Hardware List Overview

Lists all components and hardware required for assembly, identified by piece, description, and quantity.

Assembly Instructions

Preparation and Part Verification

Before assembly, verify all parts are present by comparing with the package contents and hardware lists.

Step-by-Step Assembly Guide

Provides a three-step guide for assembling the lamp, from connecting the base components to installing the bulb and shade.

Bulb Usage Recommendations

Specifies maximum wattage for Type 'A', CFL, and LED bulbs, noting an included LED bulb.