To Next PageTo Next Page
Need help?Do you have a question about the JONATHAN Y JYL3011A and is the answer not in the manual?
Recommend installation by a licensed electrician and switching off the main electrical supply.
Inspect item carefully for any damage or obvious defect before installation.
Unplug lamps before cleaning. Use soft cloths for bases and dust shades with feather dusters.
Ensure all parts are present and assemble on a soft surface to prevent scratching.
Follow guidelines to reduce risk of fire, shock, or injury; do not replace cords or defeat plug.
Use specified bulb types: 'A' bulb max 100W, CFL max 23W, or LED max 12W.
Insert harp into saddle, place shade on harp, tighten finial, and insert bulb into socket.
Place the light on a level surface to check if everything is stable.
Recommend installation by a licensed electrician and switching off the main electrical supply.
Inspect item carefully for any damage or obvious defect before installation.
Unplug lamps before cleaning. Use soft cloths for bases and dust shades with feather dusters.
Ensure all parts are present and assemble on a soft surface to prevent scratching.
Follow guidelines to reduce risk of fire, shock, or injury; do not replace cords or defeat plug.
Use specified bulb types: 'A' bulb max 100W, CFL max 23W, or LED max 12W.
Insert harp into saddle, place shade on harp, tighten finial, and insert bulb into socket.
Place the light on a level surface to check if everything is stable.
This document provides instructions for the assembly, use, and maintenance of a portable lamp.
The lamp is designed to provide illumination and features a polarized plug as a safety measure against electric shock. This means one blade of the plug is wider than the other, ensuring it fits into a polarized outlet only one way. If the plug does not fit initially, it should be reversed. If it still doesn't fit, a qualified electrician should be contacted. The lamp should not be used with an extension cord unless the plug can be fully inserted, and users are cautioned against attempting to defeat this safety feature. The lamp is intended for use with an ON/OFF type "A" bulb with a maximum of 100 watts, a CFL bulb with a maximum of 23 watts, or an LED bulb with a maximum of 12 watts. A 9-watt LED bulb is included in the box.
Before assembly, users are advised to ensure all parts are present by comparing them with the provided parts list and hardware list. If any part is missing or damaged, assembly should not be attempted, and the product may not be returned once installed. The estimated assembly time is 6 minutes. Assembly should be performed on a soft surface to prevent scratching the finish. To reduce the risk of fire, electrical shock, or injury, users must follow the provided guidelines for safe use and installation. The external flexible cable or cord of the luminaire cannot be replaced; if it is damaged, the luminaire must be destroyed.
The assembly process involves two main steps:
For care and maintenance, lamps should be unplugged before using any cleaning solutions. Shades can be dusted with a feather duster or an appropriate vacuum-brush attachment. Lamp bases should be wiped with a soft, dry cloth and cleaned using methods suitable for the material. The use of chemicals and household cleaners should be avoided as they may damage the finish.
Installation of this lighting fixture should be performed by a licensed electrician. Before installation, the main electrical supply from the main fuse box/circuit breaker must be switched off. The item should be inspected carefully before attempting to install it. If there is any damage or obvious defect, the item should not be installed.
General| Finish | Black |
|---|---|
| Style | Modern |
| Number of Lights | 1 |
| Bulb Type | LED |
| Voltage | 120V |
| Power Source | Hardwired |
| Location | Outdoor |
| IP Rating | IP44 |
| Material | Metal |
