JONATHAN Y JYL3031A - User Manual

To Next Page

WARNING

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR

OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

CARE AND MAINTENANCE

Model# JYL3031A

Product Dimensions: 14"Lx 14"W x 32"H

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate

vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to

the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this lamp cannot be replaced;

If the cord is damaged, the lamp shall be destroyed

**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce

the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in

the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension

cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A Lamp base 1X E Harp 1X

B Neck 1X F Shade 1X

C Saddle 1X G Finial 1X

D Socket 1X H Bulb 1X

Need help?

Do you have a question about the JONATHAN Y JYL3031A and is the answer not in the manual?

Summary

Safety and Warnings

Installation Inspection and Return Policy

Inspect item for damage before installation. Do not install if defective; returns not accepted after installation.

Care and Maintenance Guidelines

Unplug before cleaning. Dust shades with feather duster or vacuum. Wipe bases with soft cloth. Avoid chemicals.

Assembly Safety and Electrical Precautions

Ensure all parts. Assemble on soft surface. Follow guidelines to reduce risk of fire, shock, or injury. Note cord replacement and polarized plug.

Assembly Preparation

Part Verification and Bulb Specifications

Confirm all parts are present before assembly. Use specified bulb types and wattages for safe operation.

Summary

Safety and Warnings

Installation Inspection and Return Policy

Inspect item for damage before installation. Do not install if defective; returns not accepted after installation.

Care and Maintenance Guidelines

Unplug before cleaning. Dust shades with feather duster or vacuum. Wipe bases with soft cloth. Avoid chemicals.

Assembly Safety and Electrical Precautions

Ensure all parts. Assemble on soft surface. Follow guidelines to reduce risk of fire, shock, or injury. Note cord replacement and polarized plug.

Assembly Preparation

Part Verification and Bulb Specifications

Confirm all parts are present before assembly. Use specified bulb types and wattages for safe operation.

This document provides instructions for the assembly, care, and safe use of the JONATHAN Y Model# JYL3031A lamp.

Function Description:

The JONATHAN Y Model# JYL3031A is a portable lamp designed to provide illumination. It features a traditional design with a twisted column base, a fabric shade, and a standard bulb socket. The lamp operates with an on/off switch and is intended for indoor use. Its primary function is to offer ambient or task lighting in a room.

Important Technical Specifications:

Model Number: JYL3031A
Product Dimensions: 14"L x 14"W x 32"H
Bulb Type Compatibility:
- ON/OFF Type "A" Bulb: Maximum 100-watt
- CFL Bulb: Maximum 23-watt
- LED Bulb: Maximum 12-watt
Included Bulb: The lamp comes with an LED 9-watt bulb.
Plug Type: Polarized plug (one blade wider than the other) for safety, designed to reduce the risk of electric shock.
Power Cord: External flexible cable or cord. If damaged, the lamp must be destroyed as the cord cannot be replaced.
Assembly Time: Estimated 6 minutes.

Usage Features:

Assembly: The lamp requires minimal assembly, involving connecting the neck to the base, inserting the harp into the saddle, placing the shade, tightening the finial, and screwing in the bulb.
Polarized Plug Safety: The lamp is equipped with a polarized plug. Users must ensure the plug fits fully into the outlet. If it doesn't, they should reverse the plug. If it still doesn't fit, a qualified electrician should be contacted. The use of extension cords is only recommended if the plug can be fully inserted into the extension cord. Users are explicitly warned not to disregard this safety feature.
Bulb Installation: The lamp supports various bulb types within specified wattage limits. The included 9-watt LED bulb offers energy-efficient lighting.
Stability Check: After assembly, users are instructed to place the lamp on a level surface to ensure it is stable before use.
On/Off Operation: The lamp is designed for simple on/off operation, though the specific location or mechanism of the switch (e.g., inline cord switch, rotary socket switch) is not detailed in the provided excerpts.

Maintenance Features:

Cleaning Lampshades: Lampshades can be dusted with a feather duster or a vacuum-brush attachment.
Cleaning Lamp Bases: Lamp bases should be cleaned with a soft, dry cloth. The cleaning method should be appropriate for the material of the base.
Chemical Avoidance: Users are advised to avoid using chemicals and household cleaners on the lamp, as these can damage the finish.
Pre-Cleaning Precaution: Always unplug the lamp before using any cleaning solutions.
Pre-Installation Inspection: Before installation, users must carefully inspect the item for any damage or obvious defects. If any are found, the item should not be installed. Once installed, the item may not be returned.
Cord Damage: If the external flexible cable or cord is damaged, the lamp must be destroyed as the cord cannot be replaced. This is a critical safety instruction.
Assembly Surface: During assembly, it is recommended to assemble the item on a soft surface to prevent scratching the finish.
Safety Guidelines: To reduce the risk of fire, electrical shock, or injury, users must follow the provided guidelines for safe use and installation.
Part Verification: Before beginning assembly, users should ensure all parts are present by comparing them with the package contents list and hardware contents list. If any part is missing or damaged, assembly should not be attempted.