JONATHAN Y JYL3023A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
Model# JYL3023A
Product Dimensions: 15"Lx15 "W x 61.5"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord
unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y JYL3023A Specifications

General

Category	Outdoor Light
Model Number	JYL3023A
Brand	JONATHAN Y
Finish	Black
Light Source	LED
Voltage	120V
Wattage	12W
Color Temperature	3000K
IP Rating	IP44
Weather Resistant	Yes
Dimmable	No
Type	Wall Lantern
Material	Metal
Lumens	800 Lumens

Summary

Warning and Safety Information

General Warnings

Inspect item for damage before installation; do not install if defective. Item is non-returnable once installed.

Care and Maintenance

Unplug lamps before cleaning. Use a feather duster or vacuum brush for shades, and a soft dry cloth for bases.

Important Safety Instructions

Verify all parts, assemble on a soft surface, follow guidelines for safe use and installation.

Polarized Plug Safety

Lamp features a polarized plug for safety; ensure it fits outlet. Never use with extension cords.

Product Identification and Parts

Model and Dimensions

Model# JYL3023A, dimensions 15"Lx15"W x 61.5"H.

Part List and Hardware

Lists components A-H including lamp base, neck, shade, harp, finial, and bulb with quantities.

Product Preparation and Assembly

Preparation Steps

Ensure all parts are present before assembly. Estimated assembly time is 6 minutes.

Assembly Step 1: Base and Neck

Connect the power cord to the base and screw the neck onto the lamp base securely.

Assembly Step 2: Shade and Bulb

Insert the harp, attach the shade with the finial, and insert the bulb into the socket.

Assembly Step 3: Stability Check

Place the assembled lamp on a level surface to check for stability.