JONATHAN Y JYL3049A User Manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE
QUANTITY
A.B.C.D Lamp base 1X E Harp 1X
B Neck 1X F Shade 1X
C Saddle 1X G Finial 1X
D Socket 1X H Bulb 1X
Model# JYL3049A. JYL3049B
Product Dimensions: 14"Lx 14"W x 26"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS

JONATHAN Y JYL3049A Specifications

General

Product Type	Outdoor Light
Model Number	JYL3049A
Brand	JONATHAN Y
Category	Outdoor Light
Style	Traditional
Material	Metal
Finish	Black
Light Source	LED
Bulb Type	Integrated LED
Wattage	12W
Number of Bulbs	1
Voltage	120V
Color Temperature	3000K
Lumens	800
Safety Rating	UL Listed
IP Rating	IP44

Summary

General Safety and Care Instructions

Warning

Inspect item carefully before installation. Do not install if damaged or defective.

Care and Maintenance

Unplug lamps before cleaning. Dust shades with a feather duster or vacuum brush.

Important Safety Instructions

Ensure all parts are present. Assemble on a soft surface to prevent scratching.

Part List and Hardware

Assembly Guide

Preparation

Verify all parts are present before beginning assembly. Estimated assembly time is 6 minutes.

Step 1: Connect Neck to Base

Pull power cord, connect neck to base, and screw neck onto lamp base securely.

Step 2: Attach Shade and Bulb

Insert harp into saddle, attach shade to harp, tighten finial, and screw in bulb.

Step 3: Final Stability Check

Place the assembled lamp on a level surface to check if everything is stable.