Step 1 Step 2 Step 3
Pull power cord to connect the Neck (C) to the Base (A). Insert the Harp (F) into the Saddle (D). Put the light on a level surface to check
Screw the lamp body (C) onto the Lamp base (B) Put the shade(G) on the Harp(F), then if everything is stable.
Screw the Lamp body (B) onto the Lamp base(A) tighten the Finial (H)into the Harp (F)
Be careful not to twist the power cord and tighten securely Insert the bulb(I) into the socket(D).
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
To Previous Page
Loading...
