PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Step 1 Step 2 Step 3
Make sure all parts could be aligned before assemble Insert the bulb(G) into the socket. Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broken Put the silicone strap(H) on the waterproof shade(I), if everything is stable.
Screw the tube (E) onto the Lamp base (F) then tighten the Finial into the socket base.
Screw the Lamp body (A) onto the Lamp body (E)
Screw the Lamp body (B) onto the Lamp body(A)
Screw the Lamp body (C) onto the Lamp body(B)
Screw the Lamp body (C) onto the Lamp shade(D)
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
To Previous Page
Loading...
Need help?
General
