JONATHAN Y USA1004 User Manual

INSTRUCTIONS
MUSHROOM LAMP


WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the
methods appropriate to the material. Avoid the use of chemicals and household cleaners as they
may damage the finish.
CARE AND MAINTENANCE
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
-Please make sure that you have all parts indicated before you begin assembly of this item
-This item should be assembled on a soft surface to prevent scratching the finish during assembly
-To reduce the risk of fire, electrical shock or injury to persons or property, please follow this guide for
safe use and installation
*This lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. Do not attempt to disregard this safety feature.

JONATHAN Y USA1004 Specifications

General

Brand	JONATHAN Y
Model	USA1004
Category	Home Lighting
Language	English

Summary

Product Information and Safety

Product Warning and Care

Inspect item for damage before installation. Do not install if defective. Follow care guidelines for dust and cleaning.

Important Safety Instructions

Ensure all parts are present. Assemble on soft surface. Follow guide for safe use and installation.

Polarized Plug Safety Feature

Lamp has a polarized plug for shock reduction. Fit into outlet one way; reverse if needed.

Assembly and Operation Instructions

LED Bulb Installation

Gently twist the LED bulb into the socket until snug. Do not over-tighten.

Lamp Shade Attachment

Slide the shade over the base, aligning tabs with slots. Adjust for straightness.

Secure Lamp Shade

Rotate the shade clockwise until it snaps into place, ensuring it won't wobble.

Operation and Bulb Replacement

Flip the switch to operate. Use dimmable E26 LED 4W bulb for replacement.

LED Bulb Usage Warning

For LED bulbs only. Incandescent bulbs may cause melting, injury, fire, or death.